The 3rd Standing Council of the Machine Tool Association was held in Wuhan

On January 20, 2010, the 6th Executive Director (Enlarged) Meeting of the 6th China Machine Tool Industry Association was held in Wuhan. Zhang Xiangmu, Director of the Equipment Industry Department of the Ministry of Industry and Information Technology, and Li, Director of the Energy Conservation and Technology Equipment Department of the National Energy Administration. Chen Dongqi, vice president of the Institute of Macroeconomics of the State Development and Reform Commission, and Jia Yaobin, member of the Standing Committee of the Wuhan Municipal Committee, attended the meeting and delivered speeches or made important speeches; Wen Zhenfu, deputy mayor of Wuhan, and Wang Jianyu, director of the equipment industry department of the Ministry of Industry and Information Technology, Director of the Department of Energy Conservation and Technology Equipment of the National Energy Administration Wang Shuqiang attended the meeting; representatives of the directors of the China Machine Tool Industry Association, vice chairman of the rotating board, relevant leaders of the permanent institutions, representatives of the deputy directors, representatives of the standing directors, and from the whole country Nearly 170 invited representatives from the machine tool industry around the world attended the meeting.
The morning meeting was presided over by Zhang Zhigang, the deputy chairman of the rotating committee, and the rotating vice chairman Huang Zhao gave a welcome speech. In his speech, Huang Zhao expressed his warm welcome to the leaders and representatives who have come to the meeting. I would like to express my heartfelt gratitude to the friends who have always cared for and supported the development of the machine tool industry.
In his speech, Jia Yaobin introduced the basic situation of Wuhan's industrial economy and machine tool industry and related policies.
Zhang Xiangmu gave an important report to the delegates and introduced the general situation of the equipment manufacturing industry and the situation facing it. He said that the machine tool industry has made rapid progress in recent years and has made great progress in independent innovation. When exchanging the basic situation of China's industrial sector, Zhang Xiangmu pointed out the problems in China's equipment manufacturing industry: lack of core technology, low basic supporting capacity, and insufficient industrial concentration. Zhang Xiangmu believes that the current situation facing the equipment industry is both opportunities and challenges, but some challenges can be turned into opportunities. At the same time, he also pointed out that the external environment is undergoing profound changes, which has created a mechanism for the Chinese equipment manufacturing industry. For the future development plan, Zhang Xiangmu said that the "Twelfth Five-Year Plan" is an important historical stage in building a well-off society in an all-round way. It is an important task for China to strive to build a strong country in equipment manufacturing during the "Twelfth Five-Year Plan" period. Zhang Xiangmu focused on the overall thinking, principles, objectives and strategic tasks of the national equipment manufacturing industry during the 12th Five-Year Plan.
In his speech, Li Ye emphasized that the purpose of participating in this meeting is twofold: one is to congratulate, and the other is to show the status. Li Ye said that under the situation that the global financial crisis has caused a general economic downturn, the Chinese machine tool industry can achieve 12% growth in the past 2009, which is worthy of congratulations. At the same time, it is said that the development of the equipment manufacturing industry, especially the machine tool industry, should be given more care and support and fulfill its responsibilities.
Li Ye fully affirmed the changes in the machine tool industry in China in recent years. He said that in recent years, the machine tool industry has paid more attention to the market and applications, and has made great efforts to grasp the service and grasp the equipment transformation and upgrading. For the next step in the development of the machine tool industry, Li Ye proposed to strengthen independent research and development, and strengthen the promotion and application of products. He said that the current trend of demand for large equipment in the energy industry is very obvious. He also said that the energy industry is willing to support the development of the machine tool industry as always, and actively use domestic equipment.
Chen Dongqi talked about five issues when introducing the "Twelfth Five-Year Plan" macroeconomic situation and policies: (1) the international economic situation in 2010 and the "twelfth five-year plan" related to the machine tool industry; (2) the spread of the financial crisis In the difficult period, 2009 is a difficult year, and 2010 is a complicated year, but Chen Dongqi believes that the global economy has a recovery trend; (3) the domestic economy has reversed its downward trend, and overall, it should be bottoming out in the first half of the year and rebounding in the second half; (4) The macroeconomic regulation and control measures in the economic rise should be conditional two-way adjustment; (5) The “Twelfth Five-Year Plan” period will be both opportunities and challenges, and the economic situation will undergo some major changes. The Chinese economy will be affected by the whole world. test.
The meeting on the afternoon of the 20th was presided over by Vice Chairman Long Xingyuan.
First of all, Wang Liming, executive vice president and secretary-general of China Machine Tool Industry Association, made a keynote report on the “12th Five-Year Development Plan for China's Machine Tool Industry”. Remind delegates to seriously study the “Twelfth Five-Year Plan” (framework discussion draft) of the machine tool industry, and put forward constructive opinions and suggestions to jointly contribute to the progress and development of the industry.
In the following exchange of enterprise experience, Chairman of Longchuanyuan of Shaanxi Qinchuan Machine Tool Group Co., Ltd., Chairman of Liao Shaohua of Chongqing Machine Tool (Group) Co., Ltd., Chairman of Li Bomin of Shandong Bote Precision Co., Ltd., and forging of Hubei Sanhuan Mr. Wan Jiaxuan, Chairman of Equipment Co., Ltd., Chairman He Minjia of Guangzhou CNC Equipment Co., Ltd. and Vice President Qi Binjiang of Qiqihar Second Machine Tool (Group) Co., Ltd. introduced their respective companies in response to the financial crisis, product structure adjustment, independent innovation, The experience of actively exploring new economic growth points and other aspects has a good inspiration and reference for the participants.
Finally, Wu Bolin, executive vice president of China Machine Tool Industry Association, made a concluding speech. Wu Bolin introduced the economic operation and basic characteristics of the machine tool industry in 2009. It introduced the importance of the product and industrial structure adjustment of the machine tool industry in response to the financial crisis in recent years, and described the urgency of accelerating independent innovation and investment in fixed assets. positive effects. Wu Bolin also said that the permanent establishment of the China Machine Tool Industry Association will continue to strengthen the cultivation of business capabilities and the construction of talent teams through innovative attitudes to create better services for enterprises in the whole industry.
The conference ended satisfactorily in the warm atmosphere of the active participation of the participants.