Abstract On December 6-7, 2012, the Seventh Board of Directors (Enlarged) Meeting of the China Machine Tool Industry Association was held in Beijing. The Standing Council, invited representatives, the secretary-generals of the chapters, relevant personnel of the permanent establishments and leaders of 18 representative enterprises attended the meeting. ...
On December 6-7, 2012, the Seventh Board of Directors (Enlarged) Meeting of the Sixth China Machine Tool Industry Association was held in Beijing. The Standing Council, invited representatives, the secretary-generals of the chapters, relevant personnel of the permanent establishments and leaders of 18 representative enterprises attended the meeting.
The meeting was chaired by the Chairman of the Machine Tool Association, Huang Zhao, the chairman of Wuhan Heavy Machine Tool (Group) Co., Ltd., and Wu Bolin, executive vice chairman. The conference heard a report from the Deputy Director of the Equipment Industry Department of the Ministry of Industry and Information Technology, Wang Weiming, "Long-term, Practically Promoting Transformation and Upgrading", Special Report on Macroeconomic Situation Made by Minister Yu Bin of the Development Research Center of the State Council, and Deputy Secretary-General of the Machine Tool Association Chen Huiren Representing the work report of the implementation of the strategic transformation and transformation and upgrading of the permanent establishment of the association to promote the sustainable development of the industry,
And the introduction of the industry economic operation by the Executive Vice President and Secretary General of the Machine Tool Association Wang Liming.
The meeting revealed important industry data information. In the analysis of the machine tool industry in January-October 2012, Wang Liming pointed out: “The industry data provided by the National Bureau of Statistics shows that the growth rate of production and sales in the whole industry has declined significantly and the profit has been negatively negative, and the total industrial output value of the association’s key enterprises has been In a double-digit negative growth, both the company's orders and new orders fell sharply, and the inventory increased significantly. At present, the domestic market continues to be sluggish, the industry's production and sales declines, and the profit is negative, the situation is not optimistic."
January-October data shows that the situation is grim
Compared with the growth rate of about 30% that has been maintained steadily last year, the growth rate of 11.1% this year is indeed “sliding obviously”, and the growth rate of industrial output value of the whole industry in the first half of this year announced by the association is only 11.6%. At the same time, the total profit is also falling. According to Wang Liming, from January to September, the industry achieved a profit of 28.35 billion yuan, a year-on-year decrease of 3.6%, and the product sales revenue margin was 5.8%, a decrease of 0.7 percentage points year-on-year.
According to statistics, from January to October, the total industrial output value of the gold cutting machine tool industry was 115.88 billion yuan, a year-on-year decrease of 2.2%, and the output decreased by 16.8%.
China's Machine Tool Industry Association's 217 key contact companies fell 34.0% and 24.7% respectively in October as new orders and on-hand orders. The total industrial output value of these enterprises totaled 79.98 billion yuan, a year-on-year decrease of 18.1%. The output value and output of Jinqie machine tools decreased by 19.1% and 29.7% respectively. Among them, the rolling industry and CNC system are the two most serious industries, with the total output value falling by 35.0% and 35.8% respectively.
High import volume, slower export growth
At the same time, the import volume of China's machine tool products remained high in January-October, up 2.1% year-on-year, of which Jinchee machine tool imports were US$9.36 billion, up 8.1% year-on-year, and processing center imports were the highest, totaling 42,000 units. 4.74 billion yuan; while the export growth rate is gradually slowing down, the highest export value is still cutting tools.
Wang Liming emphasized that the economic operation of China's machine tool industry in the first ten months was severe, and the industry's annual situation was not optimistic; the current market is changing rapidly, the market demand for low-end products is generally shrinking, and users' demand for products and services is rapidly increasing. Will become the norm in the future market. In his report, he predicted that it is expected that the growth rate of the industrial output value of the machine tool industry will stabilize in the fourth quarter, but the growth rate of the metalworking machine tool industry may continue for a long time. He further pointed out: The statistical caliber, the whole industry will show a growth rate of more than 10% for the whole year, and the metal processing machine tool industry may show a small positive growth. According to the data of the association's key contact enterprises, the growth rate of the output value of metal processing machine tools of key enterprises should be -20% or less."
Looking forward to the development trend in 2013
From the overall situation, the fundamental adjustment policy of the central transformation and upgrading remains unchanged. At the same time, the basic driving force for domestic economic development exists objectively. First, the investment and consumption brought about by rural urbanization will have a long-term impact on economic development. Second, the industrial transfer from the east to the west will also drive investment and employment in underdeveloped areas. Third, the income of the Chinese people will increase. Survival consumption has shifted to improving quality of life consumption. The Chinese economy is expected to show a slow and moderate recovery.
In addition, the situation of investment in the national economic sector is not pessimistic. The state’s approval of the rail transit project, the approval of new nuclear power projects, the large aircraft field, the research and development investment in aviation engines, and the improvement of vehicle emission standards will definitely drive a new round of demand for high-end equipment in the market. A good impetus to the machine tool market
Under the above macroeconomic environment, it is expected that the total industrial output value of the machine tool industry will maintain a growth rate of more than 10% in 2013.
After the careful arrangement and detailed process of the 7th Executive Director (Extended) Meeting and the 2nd Secretary-General Meeting of the 6th China Machine Tool Industry Association, it finally came to a successful conclusion. The status quo and future development direction of the machine tool industry proposed in the meeting deserves the whole industry to ponder.
