Floor-standing chiller

The large dry type air cooler is usually a falling type. The falling type air cooling fan is mainly composed of the upper part, the middle part and the lower part: the lower part of the falling type cooling fan is a water tray, which is used for collecting the frosting water of the cooling fan and supporting the main body of the fan, and at the same time It is an air suction port; the upper part is an exhaust hood, and the fan is installed inside. The air volume and vertical pressure requirements are selected to select axial flow or centrifugal fan and its corresponding number. The axial flow fan is generally lower than the centrifugal fan, but the air volume is mostly. A shower pipe is installed between the hood and the pipe cluster for use as a water cream.

The middle part is an air-cooled exhaust pipe (evaporation pipe set). For the sleeve type cooling fan, the cooling pipe cluster is made of D25×2.5mm seamless steel pipe, and the cover is 0.5mm galvanized steel piece or 0.5mm aluminum piece set. Piece tube. Falling type air coolers are divided into different types according to the way of air outlet: top air blower type air cooler, lower side air blower type air cooler, and upper side air blower. There are three types of cooling chillers for cold storage: KLD type drop chillers are used for freezing refrigerated rooms; KLL type is used for cooling refrigerating rooms; KLJ type is used for freezing rooms.