Closed eye single leg standing detector use method

Closed eye single leg standing tester

Technical Parameters:

1. Range: 1~999 seconds
2. Accuracy: ±1% FS
3. Power supply AC220V50HZ
4. Button: switch / clear, peak hold
5. Working temperature: 0~40°C<90%RH

Instructions:
Plug the power plug into an AC 220V power outlet.
Press the power switch and the controller will display the zero position.
Subjects placed arbitrarily with both hands, closed their eyes, standing on the test stand with a customary leg, and knees on the other leg, leaving the foot off the platform. When the lifted foot leaves the stop pedal, it starts timing, until the standing foot moves or falls off the foot, the controller sounds an alarm, and the value displayed by the automatic lock display is the time when the closed eye is standing on one leg.
After the test is completed, press the clear button to reset the instrument.